Coffee filter holder - 51mm round in 64mm round
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
51mm coffee filter holder that fits in an Aeropress filter holder
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
一个51mm粉碗用咖啡滤纸的滤纸架，能放进64mm滤纸（爱乐压）的滤纸架（见图1）。
A coffee filter holder for 51mm round filter, that fits in a 64mm filter holder (e.g. accessory for Aeropress, see Fig.1.).
它现在的尺寸大约可以放下200片滤纸。
The current size will fit ~200 pieces of filter papers.
我设计了一个可以折叠的手柄，方便从爱乐压的滤纸架中拿出这个滤纸架。你可以选择一体打印的版本，然后用刮刀来把它掰开（它会在悬空面留下一些丑陋的打印失败的痕迹，见图2，3）；或者选择分开打印本体和手柄（如果你需要这个手柄），剪两小段耗材来做转轴（见图4，5）。请注意，手柄的方向必须使泪滴型孔的尖端向上，否则悬垂可能导致孔变形，使得耗材难以插入。
I designed a foldable handle for easy removal of this holder from 64mm holder. You can either choose the print-in-place-handle version and separate it with scraper after print (which sadly will leave some artifact, see Fig.2 & Fig.3); Or you can choose to print the base and the handle separately, and use two small cut-off from filament as the hinge (see Fig.4 & Fig.5). Note, the handle should be print in the orientation that the tip of teardrop-shaped hole is facing upwards, or the overhang in the hole might make it hard to insert the filament hinge.