Coffee filter holder - 51mm round in 64mm round
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
51mm coffee filter holder that fits in an Aeropress filter holder
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
一个51mm粉碗用咖啡滤纸的滤纸架,能放进64mm滤纸(爱乐压)的滤纸架(见图1)。
A coffee filter holder for 51mm round filter, that fits in a 64mm filter holder (e.g. accessory for Aeropress, see Fig.1.).
它现在的尺寸大约可以放下200片滤纸。
The current size will fit ~200 pieces of filter papers.
我设计了一个可以折叠的手柄,方便从爱乐压的滤纸架中拿出这个滤纸架。你可以选择一体打印的版本,然后用刮刀来把它掰开(它会在悬空面留下一些丑陋的打印失败的痕迹,见图2,3);或者选择分开打印本体和手柄(如果你需要这个手柄),剪两小段耗材来做转轴(见图4,5)。请注意,手柄的方向必须使泪滴型孔的尖端向上,否则悬垂可能导致孔变形,使得耗材难以插入。
I designed a foldable handle for easy removal of this holder from 64mm holder. You can either choose the print-in-place-handle version and separate it with scraper after print (which sadly will leave some artifact, see Fig.2 & Fig.3); Or you can choose to print the base and the handle separately, and use two small cut-off from filament as the hinge (see Fig.4 & Fig.5). Note, the handle should be print in the orientation that the tip of teardrop-shaped hole is facing upwards, or the overhang in the hole might make it hard to insert the filament hinge.