Counting matching models…
Update (Aug 1/2017): Uploaded the most recent "V3.0" design, replacing the STL/SCAD and pictures. Nudged things around slightly, and rotated the scoop holder 30 degrees so it doesn't hit the funnel anymore. Here's my alternative take on…
Printed on Prusa I3 MK3S+, will fit on bed. Nozzle Diameter: 0.4mm Perimeter Thickness: 3 Layers Infill: 20% Gyroid Nozzle Temp: 210deg The side holder is bolted to the main body using 3 M4x18 bolts from the inside. There are 2 STLs as…
Dissatisfied with the Aeropress 'travel kit', still got to carry a whole raft of things - like coffee and the filters? I gotcha! Print instructions EDIT 2020-06-14: corrected file list. EDIT 2022-05-30: Added the 120mm pot. When I got my…
Screw top Aeropress filter holder / storage container w/ AeroPress logo. 15mm base is big enough to hold the filters that ship with the AeroPress, 45mm also available for bigger storage. Thanks for checking out my model I hope it helps…
This is a remix of the Carry That Skadis from Will, adapted to carry an Aeropress kit plus other accessories, (beans, hand grinder etc…). I'm also using the Skadis Secure Clip from mkingey. Dimensions (with the kit on): WxHxD 238mm x…
it is ready for 2x M5 nut to be inserted in the top part (at best in the middle of the printing) and 2x screw bar to make the stand stable. For the bottom part it is recommended to add also nut or screw nut
This is my very first 3D printing design. It's simple but it works well. I've printed it in solid PLA on my Ender 3 V3 SE.
Recreated the funnel from Aeropress so you can print it in your preferred color. If you just want the standard black one just buy it here, its really inexpensive: https://aeropress.com/product/funnel/ Category: Kitchen & Dining
small case to hold some filters while on the go.
My own design of Aeropress Go! You can have Aeropress assembled the whole time on journey. Grinder clip - I use Rhinowear grinder which fits perfectly to Aeropress (handle of that grinder is not well designed and basically everything on…
I have several coffee filters that were never neatly stored in the cupboard.Therefore I have designed this holder. Attention! Despite several adjustments of the Brim/Mouse ears on the side, the pressure did not stick to the sheet all the…
This is a three piece case for 350 Aeropress filters. The case is designed to fit up to 350 63.5mm filter papers designed for the Aeropress or Aeropress Go. The case has a lid that is threaded so that the case can be closed for travel.…
Wall mount for Aeropress. Used for drying and/or storage. Can be mounted with screws or double sided tape (3M UHB or VHB should hold the weight) Check out my Aeropress filter holder: https://www.thingiverse.com/thing:3409488/ Print…
I wanted to organise all our office coffee equipment and accessories, but I couldn't find any good existing solution. So I made my own using gridfinity system! I will be adding new models as I finish printing them so I know they are ready…
3D-Printable Custom Aeropress Cap Replacement Description: Keep your Aeropress experience going with our custom-modeled replacement cap, tailored for the discerning coffee enthusiast. Whether you're looking to replace a lost cap, swap out…
Customizable container for AeroPress filters with adjustable dimensions. I found a lot of the other models on here to have weird artifacts, so I made yet another version from scratch. Fully customizable if you want to tweak anything to…
Wall mounted holder for Aeropress filters. I uploaded 2 versions with different internal depth. 15- and 35mm. Can be mounted with a small countersunk screw or double sided tape. Print instructions Category: 3D Printing Print Settings…
Holds around 300 filters. Base is slighly slanted so that filters are easier to remove. Lid is reversible and can be put in the bottom as a base - 6mm magnets can be superglued onto the base of the holder an the lid to hold evrything in…
In need for a place for the filter pads of my AeroPress I designed this screw top container. The design is inspired by the AeroPress Design. It holds about 200 filters. Printed with .4 mm nozzle at .2 mm layer height.
Aeropress filter container. Inspired by Aeropress's rugged design. Perfect for outdoor use as the container is relatively waterproof. Two versions available Version 1: AeroPress Original, Clear, Premium, Go, and Go Plus Version 2:…
On my ender 2 I rather print without supports, and this Aeropress Scoop was part of a tutorial to learn the Ways of Fusion 360 (they have a Video on it) Source here: And I love my Aeropress :) if you don't want to print with a brim (I…
This AeroPress stand not only looks beautiful on your kitchen worktop, it also holders all the important components of your favourite coffee making machine! With dedicated space for paper filters and the end cap. The raised platform for…
I bought the Aeropress back before they came out with a travel version, but the only thing I ever wanted it for was travel. I was shocked at how poorly designed it was for packing. You need to protect the rubber stopper by not storing it…
The Aeropress, while an excellent travel brewer, does not feature a way with which to carry filters. I designed a holder that is modeled after the original filter cap, to retain the iconic look. The holder is as compact as possible while…
A little tool to help removing an overtightened filter holder, or just to be used on a regular basis. Print settings (~1h 25m): - no support - with a 0.4 nozzle - set to 0.6 line width - 0.28 line height - 2 walls - 100% infill (/20%…
A compact tabletop storage rack to keep your AeroPress, accessories and filters in one small space. A removable drip tray provides somewhere to stand the AeroPress until you can clean it. To save space, the AeroPress is stored with the…
Goes over the AeroPress filter holder. Matches the hexagonal aesthetic of the filter holder design. I always found it odd that there is no cover included. I added some step and fusion files for making custom named designs. Since the lid…
Recreated the filter holder from Aeropress so you can print it in your preferred color. If you just want the standard black one just buy it here, its really inexpensive: https://aeropress.com/product/filter-holder/ Category: Kitchen &…
As I got Aeropress GO and Fellow Prismo “espresso” filter, there were no chance to hold them together covered by that nice red cap. So after few iterations, there is a mug extension, that can now hold not just Prismo but event filter case…
A compact Aeropress organiser station. Designed to carry all coffee kit in a campervan cupboard but suitable for any cupboard! The base holds all equipment for storage, but also holds the Aeropress stable to prevent accidental spillage…
I keep my Aeropress filters on my kitchen counter, exposing them to dust, pollen, etc. I wanted something to keep dust off of the top filter, so I whipped up this simple cover. I have another version that adds storage for the stirrer .
2 Year Update! I've been traveling in my camper van full-time using this aeropress station on the roughest roads from the tip of Baja to the Arctic Ocean! This print has held up, keeps things from flying out and keeps all the rattles and…
Hi all, I love coffee and for its prepare I use AeroPress. I take it with me almost anywhere. But problem is with paper filters. Where storage them? I made for this issue an extension, which you can put on the bayonet, on top of the…
I love these containers. We travel a lot for weekends and want to take beans with us. This is a compact way to pack them without needing to bring a big container. Re-upload of i0i0 model. Description straight from their Thingverse…
I bought an AeroPress Go Travel coffee maker a while back. While it has served me well it lays around on my kitchen counter and adds to the clutter. I am thinking of designing something for myself along the lines of a cabinet under…
Awdemuth(thngvrse) made a really nice Aeropress travel cap that you can stuff a few spare filters inside, but I wanted one with a separate filter storage compartment- that will keep the filters clean and dry. My Aeropress comes with me on…
Redesigned version of the “Coffee filter holder”. Remix of this filter holder features a slimmed-down base with removed writings Second V60 slot designed to accommodate (02) filters Aeropress filter slot that can accommodate multiple…
Always happy to see your prints and receive feedback. If you don't own a printer yourself you can buy one from me on eBay. Use support and max 0.25mm layer height. Happy printing!
Updates 4/28/2026 - uploaded additional "narrow" version of the original model per request, which now has a width <220mm 5/26/2025 - added additional clearance to the stirrer stick slot on the Alt model to accommodate the wider version of…
Remix of https://www.printables.com/model/167884-aeropress-station with the following changes: Grinder slot modified to hold a Timemore C3 Pro + measuring cup (https://www.printables.com/model/452207-timemore-c3-pro-measuring-cup)…
Just because it has Go in the name doesn't mean you can't use it at home! This is a remix of @gmarsh23's excellent AeroPress Organizer Station. It fits on a Prusa Mini because I ditched the handles and made things a bit more compact.…
There is currently no original filter holder for AeroPress XL filters. And I don't want to use the box as a holder. Here is my take on a simple holder for the larger filter size with similar aesthetics as the smaller one.
I wanted the chamber to have it's own drying area, so I replaced the filter holder cutout with a chamber holder cutout. Then, to make everything fit nicely, I moved the stirrer & scoop holder to new locations. I also increased the cap…
A small set of coffee compartments to easily bring your ground coffee with your Aeropress The compartments are stackable with a simple screw motion. There is space for 3 compartment in the classic Aeropress. So a set of 3 plus one lid…
The container that comes with the brewer constantly pops open. So, I've made a more secure one to let you Go and brew you cup wherever your adventures take you.
I've lately found the aeropress to be an awesome solution for making single cup cold brew, and with the method I've landed on, it involves the AeroPress being in my refrigerator for 24 hours inverted. I developed this model to keep the…
A 3-part adaptor to turn an Aeropress coffee maker into a cold brew setup. You will need a sport-style water bottle (300ml to 500ml) with the type of valve that you can open with your lips. this type of valve allows you to adjust the drip…
You are doing me a big favor by clicking the Like button :-) Aeropress standing filter holder
Lid for the AeroPress Go to use the inner lumen as Coffee Storage compartment Use food safe filament! Additionally you'll need one 28mm x 2.5mm rubber O-ring There are two versions: *_handle has a handle for a convenient grab
Funnel for loading the AeroPress Go. The AeroPress Go doesn't come with the funnel for loading coffee. I got tired of spilling coffee grounds on my counter when filling my AeroPress so I designed and printed a funnel to keep them off my…
Based on the official accessory with additional support for Prismo and the stir stick. You need 4x M3x20 socket head screws and 4 M3 nuts. Thanks for the reference model by @Ostella3D
Easy to print, no supports required. You can use 0.4 and 0.6mm nozzles, however, for proper operation, the layer should not be higher than 0.25mm.
For those who've been asking for an XL version to match their upgraded Aeropress - your wait is over! Introducing the Aeropress XL Organizer & Carrier - the perfect companion to your brewing routine, designed by popular demand following…
Water dispersion screen designed to work with your AeroPress to help distribute water evenly and gently onto your bed of coffee grounds. This has been specifically designed so that the AeroPress can be used in a similar way to the…
Made this just for fun to improve in Fusion 360. If you have actual improvement wishes just leave a comment. You can also just buy the original 2POUR ¯⍀(ツ)/¯ https://www.2pour.com/
I got an Aeropress GO which came with the paper filters on top but the container that came with it is far too small to fit all of them. I designed this container to fit all of the paper filters that came with the GO, plus a stainless…
I like to add frothed milk to my coffee, which requires a larger mug… But a standard AeroPress isn't stable atop larger (latte-style) mugs - as I found out the hard way. So, I created this simple adapter that securely fits into the…
A simple paper filter holder for the Aeropress XL. Added some slots to hold both the scoop and stirrer. No special printing instructions. I Printed mine with Prusament Black with a .6mm nozzle at .3mm layer height.
I love my AeroPress Coffee Maker but hated the box that held the filters. I wanted an elegant way to organize and display my coffee area in the kitchen and make it easy to grab filters in the morning with no fuss. This simple design…
When I received my Aeropress coffee maker from a friend it was missing the scoop.
I just received the new AeroPress XL and needed a filter holder. These filters are larger than the original/travel versions of the AeroPress. I thought I would give modeling a try and had a lot of fun creating this model. Base - Prints…
I wanted a prettier holder for my aeropress filters, so I made my own. This is the first version, I think I want to improve the design somewhat. Mainly to add weights in the bottom and maybe space for some feet to keep it from sliding…
A box for AeroPress paper filters. Good for protecting your filters when on the go.
Tired to having to move grounds from my grinder to the aeropress (not to mention the mess of spilled grounds) for the inverted method, I designed this (rather strange) adapter.
I wanted to be able to carry as much coffee as possible with my Aeropress. Since I do not mind carrying a pocket scale with me I created a pot that fills up the entire handle of the Aeropress, therefore maximizing carrying capacity. It is…
As someone who enjoys the convenience of AeroPress Go and loves the taste of coffee it makes, I wanted a simple way to carry my favorite coffee along with it. I created this coffee grounds container designed to fit neatly into the handle…
This excellent model wash originally made by gmarsh23 and remixed in Solidworks by me. A friend of mine asked me to make some small changes to it and to print it for him. I added: some drain holes so that the water may drain from the…
NEW AND IMPROVED!! What's changed from https://www.printables.com/model/580834-custom-aeropress-cap-replacement ? Complete rewrite of the entire OpenSCAD file - rendering takes 5% of the time of the original. Render the entire cap…
When I designed the model, there wasn't an official AeroPress XL filter holder on the market, prompting me to craft one myself. My goal was to closely replicate the aesthetic of the original AeroPress filter holder, ensuring they would…
Simple travel or storage case for AeroPress. Currently requires rubber bands to hold the two halves together, though will attempt to update with a hinged version at some point. No supports requi
YOU MUST PRINT THIS IN COLORFABB HT!!!! This is a pressure valve adapter for the AeroPress XL that uses replacement valves from the Fellow Prismo. In my opinion the XL version of the AeroPress is pretty lackluster without this attachment.…
Aeropress Filter Holder Made to stick to my work locker with double sided tape. Use this as a template for other designs! Overture PLA Pro. 210F. Supports. 30% infill. 2.5hr ( I do everything pretty slow. )
I have designed this filterholder for Aeropress Filters for Ikea Skadis, because I didn't have the original holder and also wanted to attach it to my Skadis Caddy. I also wanted a cover for the filters to prevent dust falling on it. As my…
Wrenches to make it easier to remove the filter cover from a standard Aeropress or Aeropress XL.
I made this adapter so I can grind directly into my AP.
The print I missed the most after buying the Fellow Prismo for my AeroPress is the Unlock Ring that was designed by wstein over on Thingiverse . So inspired by it I went to work and a few iterations later this model is now ready.
Added a stand and edited the screw holes to work with M3 Screws and nuts. Print instructions 0.2 layer Height, no supports necessary
This is a container I've designed to keep a standard pack of Aeropress paper filters (360 pcs). It's internal diameter is 65mm with a little bit of tolerance with internal ribs for ease of access. The internal compartment height is 40mm.…
Introducing the Aeropress Organizer & Carrier - the perfect companion to your brewing routine, designed by popular demand following the success of our original Aeropress carrier. This all-in-one solution elegantly holds every component…
This is a holder to organize an aeropress coffee maker and accessories. It's big but it fits on the PRUSA i3 MK3. Printing notes: I've only printed this once. The corners of the print pulled up a little bit so make sure to clean the print…
Print without supports. I printed mine from Prusament PETG Signal White. Use 4x25 mm screws (or 4.5x25 mm) screws.
Simple and compact AeroPress organizer/stand. -Designed to hold: Scoop Stirrer Original Funnel Paper filters -Printed out of PETG (so it can wash with warm-hot water and soap), though PLA should be fine. -Optional: place rubber bumpers on…
I love my Aeropress, but I tend to leave it in a trail behind me… especially before my first coffee. This holds all the stuff I need and the drip tray means it doesn't get gross. I leave the metal filter in the same spot as the filter…
Designed for an espresso brew in the Aeropress brewer using Casey Faris' method (linked below). Tamping the coffee this way should allow for a little more pressure, and I found that I got a better crema on top of my coffee compared to…
Tool to aid in the tightening and removal of the screw on filter cap. Stay in touch! Instagram Twitter
Prints upside down without supports. Top surface of model is angled slightly to help keep aeropress in holder. The prongs that hold the stir paddle can be difficult to print. I highly recommend giving your bed a good clean and staying…
This is a remix of the Aeropress GO (diameter 52 mm) for the original Aeropress (diameter 50 mm) Lid for the AeroPress to use the inner lumen as Coffee Storage compartment Use food safe filament! Additionally you'll need one 28mm x 2.5mm…
For when you run out of Aeropress papers and the surly barista down the road refuses to spot you a couple filters. Double fold, insert the corner into the guide, pinch and cut around the edge. The edge is sized at 6.3 cm which is slightly…
I wanted to make a holder for my AeroPress, but did not find one that I really liked, so I figured out I could design one myself. So far I am pretty happy with the result, as my AeroPress is held securely in place, while being easy to…
I use my Breville dual wall filter basket on my aeropress to give more of an espresso type coffee. Give it a go. You might know this from Joepresso . This is the same thing, but for a 54mm basket and designed to be 3d printed with no…
Replacement scoop created from this ( https://www.youtube.com/watch?v=0rwqObrwwDw ) youtube tutorial. I went by his measurement numbers but made the handle shorter Print instructions Printed on: Anycubic i3 Mega Rafts: Yes Supports: Yes…
I wanted to tidy up the cupboard where we keep the Aeropress, so I made some simple mounts to hold the main bits of the aeropress underneath one of the shelves and the smaller bits are mounted on the inside of the cupboard door. STEP…
Print with 100% infill in PETG with support just on the bed. If you don't have a printer, but want it anyway, you can find it on eBay. Please show me your make when the travel cap helped you! Simon
Simple AeroPress Holder to screw into a wall. Printed on a Prusa Mini+, 0.6mm Nozzle with Extrudr XPETG Anthracite
An all-in-one Aeropress stand / holder, a heavily modified version of and inspired by this original design . This new version improves the holder in quite a few ways, those being: Plunger can be removed more easily Slots for the flow…
Any settings, no supports needed. Supports may be helpful under the top lip if you have internal overhang adhesion issues.
Print settings: Material: PLA Nozzle: 0.4mm Layer height: 0.2mm Perimeters: 3 Supports/brim: NO Two colors: change filament after first and fourth layer, or use MMU (AMS). Note: STL files are oriented to print
