AeroPress Caddy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Countertop caddy/holder for an AeroPress coffee maker to keep all the pieces organized.
- Rating
- 4.889 / 5
- Likes
- 206
- Downloads
- 1,194
- Makes
- 11
- Views
- 7,802
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Printed on Prusa I3 MK3S+, will fit on bed.
Nozzle Diameter: 0.4mm
Perimeter Thickness: 3 Layers
Infill: 20% Gyroid
Nozzle Temp: 210deg
The side holder is bolted to the main body using 3 M4x18 bolts from the inside. There are 2 STLs as options to download for the side holder. One option is for brass heat inserts that measure ~7mm in diameter and 8mm length, the other has smaller holes measuring 3.54mm (pitch diameter) of an M4 thread so a bolt can be threaded directly into it.
Everything can be printed with no supports, the main body should be laid with the back of it on the build plate. It will fit on the I3 MK3S but just barely!