Keyboard plate fit test for Cherry MX, Alps or Choc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Calibration for cutout sizes in 3D-printed mechanical keyboard plates
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This is calibration print to determine perfect cutout sizes for 3d printed keyboard plate. Print and test switch fit. Adjustment value can be used when generating final plate.
Each plate is 1.5 mm thick. The middle hole uses the starting size; the holes to the right are expanded by the step value (0.1 mm) and the holes to the left are shrunk. There are following variants generated:
Name | Width (mm) | Height (mm) | Spacing (mm) | Number of holes |
|---|---|---|---|---|
cherry_mx_short | 14 | 14 | 19.05 | 7 |
cherry_mx_long | 14 | 14 | 19.05 | 11 |
choc_cpg1232_short | 13.7 | 12.7 | 18 | 7 |
choc_cpg1232_long | 13.7 | 12.7 | 18 | 11 |
alps_skcml_short | 15.5 | 12.8 | 19.05 | 7 |
alps_skcml_long | 15.5 | 12.8 | 19.05 | 11 |
For customization use provided OpenSCAD code.
See https://adamws.github.io/3d-printed-keyboard-prototype-with-freecad/