EFHW Antenna Transformer Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A housing for the transformer for an EFHW antenna. Fits a single 240 toroid.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A housing for an EFHW antenna that fits a single 240 toroid. Designed to accommodate multiple mounting options as well as a built-in shroud to divert rain/water away from the coax connection.
Requires M3 heat insert nuts (x7) and various M3/M5 hardware depending on what mount you choose to use.
Provided is a pole mount designed to fit my TV antenna tower (pictured), as well as a generic loop style mount for mounting elsewhere. The mounting options are made to be printed separately and attached later with hardware to allow for different mounting options. Coax tape or silicone can be used to weather seal the holes/rest of the housing.
Apologies for the poor image quality - by the time I remembered to take pictures, I had already mounted it, so these were taken with a drone.