eSun eBOX CORE ONE mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for the eSun eBox dryer designed for the CORE ONE printer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is a remix of eSun eBox Mount for FLSUN V400, from which I adopted the base and modified it for mounting on the Prusa Core One printer. The differences consist of a different arrangement of the mounting holes.
Bill of materials:
3 × M3x18 hex bolts, 3 × M3x25 hex bolts, 3 × M3 self-locking nuts, 3 × M3 washers.
To install the supports (print 2 pieces), remove the rivets securing the plexiglass panels to the printer frame. I believe this is clearly visible in the photos.
Threaded heat-set inserts were not used in the model, as I consider them unnecessary.
I recommend printing the parts in PETG with three perimeters.