eSun eBOX CORE ONE mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting bracket for the eSun eBox dryer designed for the CORE ONE printer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This model is a remix of eSun eBox Mount for FLSUN V400, from which I adopted the base and modified it for mounting on the Prusa Core One printer. The differences consist of a different arrangement of the mounting holes.
Bill of materials:
3 × M3x18 hex bolts, 3 × M3x25 hex bolts, 3 × M3 self-locking nuts, 3 × M3 washers.
To install the supports (print 2 pieces), remove the rivets securing the plexiglass panels to the printer frame. I believe this is clearly visible in the photos.
Threaded heat-set inserts were not used in the model, as I consider them unnecessary.
I recommend printing the parts in PETG with three perimeters.