1 / 3
Skadis: Grandma's Favorite Filament Clip Storage — zdjęcie 1
1 / 3

Skadis: Grandma's Favorite Filament Clip Storage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Store your favorite filament clips neatly on Ikea Skadis!

Ocena
0 / 5
Polubienia
6
Pobrania
24
Wydruki
1
Wyświetlenia
150
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Organize your workspace with this Ikea Skadis storage solution for Grandma's Favorite Filament Clips by Extrutim.

The original holds up to 8 filament clips, and if you need more, there's an XL version that can hold up to 12 clips.

It's designed to fit all variants of the filament clip, from the classic to the beasty, so you always have one handy!

Print settings

Recommended to print at 0.15 mm layer height with the slots facing down towards the build plate. It shouldn't need any supports this way, but you can always enable them if your printer needs them.

The one in the pictures is printed in Prusament PLA Prusa Galaxy Black.

Tagi