4mm Thick Lithophane holderinator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand to use with my Lithophane that had a 4mm slot to fit the frame.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 221
- Wydruki
- 4
- Wyświetlenia
- 596
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a stand to use with my Lithophane that had a 4mm slot to fit the frame. I couldn't find one, so I made my own. This one is meant to hold a T-light candle to provide the light. It came out pretty well.
The lithophane will be held at a 90' angle.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
20%
Filament: Creality PLA White Post-Printing =============
Where did I get the Lithophane file?
I printed my Lithophane for this stand from here; https://tool.itslitho.com/CreateModel I used a 4mm frame. The width was 100mm, and the height was 60mm.
This stand does have an open-ended slot, so it will probably hold other dimensions as well as long as the thickness remains at 4mm.