4mm Thick Lithophane holderinator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stand to use with my Lithophane that had a 4mm slot to fit the frame.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 221
- Makes
- 4
- Views
- 596
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a stand to use with my Lithophane that had a 4mm slot to fit the frame. I couldn't find one, so I made my own. This one is meant to hold a T-light candle to provide the light. It came out pretty well.
The lithophane will be held at a 90' angle.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
20%
Filament: Creality PLA White Post-Printing =============
Where did I get the Lithophane file?
I printed my Lithophane for this stand from here; https://tool.itslitho.com/CreateModel I used a 4mm frame. The width was 100mm, and the height was 60mm.
This stand does have an open-ended slot, so it will probably hold other dimensions as well as long as the thickness remains at 4mm.