Pimax Dream Air Babble / Vive Face Tracker Bracket

(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation platform. These models are only listed here on printables, for free, for you to print or use a print service like PCBway or JLCPCB, or your friends.)

• The position is optimized for babble trackers, and testing is ongoing for vive face tracker. 

• I originally designed a clip style that did not screw into the housing, but the placement of the tracking diodes on the headset make the clip unstable. 

• This design entirely avoids the tracking diodes, ensuring proper performance.

• This design also does not sacrifice nose space as the attachment point is beyond the next nearest obstruction for the nose.

Printing:

• Print on its side

• With a brim

• Print with supports everywhere

• Print at 0.1 with 3 perimiters

Assembly:

• Unscrew the 2x m1.6 screws near the nose at the bottom of the dream air headset

• Slide the bracket into place and screw in with the 2x m1.6 x 5mm long screws

• Install your vive/babble face tracker and screw it in

You will need

• 2x M1.6 x 5mm long screws

• M3 x 20mm socket head cap screw

• M3 nut

• If using babble, you just need the m1.6; use the original babble M5 and thread into the plastic

• If using OG vive tracker, you can thread into the plastic as well with the original screw too

Update:

• Added step file for remixes