Pimax Dream Air Babble / Vive Face Tracker Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket for the pimax dream air to use face trackers with standard vive/babble style mounting
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 321
- Makes
- 2
- Views
- 2,015
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation platform. These models are only listed here on printables, for free, for you to print or use a print service like PCBway or JLCPCB, or your friends.)
The position is optimized for babble trackers, and testing is ongoing for vive face tracker.
I originally designed a clip style that did not screw into the housing, but the placement of the tracking diodes on the headset make the clip unstable.
This design entirely avoids the tracking diodes, ensuring proper performance.
This design also does not sacrifice nose space as the attachment point is beyond the next nearest obstruction for the nose.
Printing:
Print on its side
With a brim
Print with supports everywhere
Print at 0.1 with 3 perimiters
Assembly:
Unscrew the 2x m1.6 screws near the nose at the bottom of the dream air headset
Slide the bracket into place and screw in with the 2x m1.6 x 5mm long screws
Install your vive/babble face tracker and screw it in
You will need
2x M1.6 x 5mm long screws
M3 x 20mm socket head cap screw
M3 nut
If using babble, you just need the m1.6; use the original babble M5 and thread into the plastic
If using OG vive tracker, you can thread into the plastic as well with the original screw too
Update:
Added step file for remixes