WLED Pixel LED Matrix WS2812b-64 x3 Diffuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WLED Diffuser for 3 8x8 WS2812B-64 panels, 192 LEDS
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Drop a Like if you download to appreciate the models i publish for free !
3 panel diffuser for 8x8 64LED , used for WLED , also included is a quick bracket that attaches to the diffuser and clips onto 25x25mm aluminium tube with a 45degree angle which is what i needed for this first version , I will add some other mounts for this as I plan on building a few more , leave a comment on what kind of mounts your interested in and i may add some other versions , like a basic desk mount, wall mount etc.
The project has 192 LEDS (3x64) which needs a good supply of 5amps at 5 volts while its calculated that it needs about 12 amps 60mA per LED for full brightness .
I printed in White PETG no supports needed the diffusion layer is two layers at .4 which seems to give it a nice soft diffusion while still being very bright , I may experiment with printing with other colours for the aesthetics when its off.
attachment of the panels is with the 6 holes some small screws , i have another version ive not exported to stl yet that can use a soldering iron to just melt posts to hold the panels in place but they are snug so dont tend to be falling out anyway.
Leave comments or suggestions would love to hear your feedback .