1 / 2
Footrest Anchor for Ikea Antilop Baby High Chair — zdjęcie 1
1 / 2

Footrest Anchor for Ikea Antilop Baby High Chair

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an anchor that slips onto the leg of an Ikea Antilop baby high chair and holds a footrest in place.

Ocena
4,25 / 5
Polubienia
14
Pobrania
52
Wydruki
4
Wyświetlenia
936
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This anchor will hold a footrest in place for your Ikea Antilop high chair. The outer piece is printed in a hard material (e.g., PLA), and the inner piece is printed with a flexible material (e.g., TPU). Print two sets for each of the front legs.

As weight is loaded downwards, the inner flexible piece is compressed against the metal leg and held in place by friction. When installing, rotate each so that your footrest (please source your lumber separately) makes full contact with both surfaces.

It might take a bit of force to initially lock it. To remove, just slide the outer piece upwards.

Update: There's a new version of the outer solid piece (r7) that has a chamfer along the top and bottom.

Tagi