Pierre Governors Multi Use Logo with Chain Link (No AMS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Pierre Governors logo separated into 3 pieces. Can be used as Hype Chain, Key Chain, Ear Ring, etc.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Public Domain
This is a flat 2d model of the Pierre Governors Logo located in Pierre, SD.
I made the model into three pieces as I don't have AMS. Intent is outer is to be printed black, second ring is white and inside "P" is green. They will all slip together and just glued. I recommend scaling them together with uniform scale. Then change the height back to 5 mm. I also recommend printing it with the front side face down on your build plate to look better.
I also included a chain link incase you want to make a hype chain. For adults you need about 24 links and kids about 20.
One picture is of the hype necklace and the second picture is earing size.