Pierre Governors Multi Use Logo with Chain Link (No AMS)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Pierre Governors logo separated into 3 pieces. Can be used as Hype Chain, Key Chain, Ear Ring, etc.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
This is a flat 2d model of the Pierre Governors Logo located in Pierre, SD.
I made the model into three pieces as I don't have AMS. Intent is outer is to be printed black, second ring is white and inside "P" is green. They will all slip together and just glued. I recommend scaling them together with uniform scale. Then change the height back to 5 mm. I also recommend printing it with the front side face down on your build plate to look better.
I also included a chain link incase you want to make a hype chain. For adults you need about 24 links and kids about 20.
One picture is of the hype necklace and the second picture is earing size.