1 / 1
6 Bay Glock-Beretta Magazine Holder — zdjęcie 1

6 Bay Glock-Beretta Magazine Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dimensionally correct for Glock 19 and Beretta APX A-1 magazines

Ocena
0 / 5
Polubienia
5
Pobrania
19
Wydruki
0
Wyświetlenia
73
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

There are a ton of these, but many times the dimensions are not equal for each 'bay' or compartment.  I used this layout for a basic idea: https://www.printables.com/model/462741-glock-beretta-magazine-holder, but I built it from scratch (TinkerCad).  I needed a new one for the brands/models listed.

The outside edges are chamfered, and I ensured the compartments are all dimensionally the same as well as confirming it will hold several different brands of Glock 19/17 magazines and my Beretta APX A-1 Compact/Tactical.  There is extra space on both dimensions/sides, so, oriented in the same direction, it holds the magazines base up and the bases will not collide (may touch) on either side, short or long way. 

I have a number of different brands I shoot for sport and use these type of holders to organize magazines by brand and model.  Often the wells are not standardized in size and do not hold a number of the same type. Height (like the difference between a G19 and G17) shouldn't be an issue as long as they are not curved/bayonet style. Other brands may fit, like my CZ mags are a bit more slender and will fit, as well as some Springfield. There is a 6 well and 4 well (cut down from the 6 well model).  The holes are just to save a little filament though it slows the print a little bit.  On my FLSun T1 Pro, the 4 bay shows about 2 hours and 74 grams of PETG.  On my QIDI Q2, it's about 3 hours, and 63 grams.  The T1 Pro is just that much faster (slowed down to 50% in the areas with holes).

Let me know if I missed a sizing and which part is off.  I struggled to find one equally dimensionally accurate in all of the mag wells so I hope this is helpful to all.

Tagi