1 / 1
6 Bay Glock-Beretta Magazine Holder — image 1

6 Bay Glock-Beretta Magazine Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Dimensionally correct for Glock 19 and Beretta APX A-1 magazines

Rating
0 / 5
Likes
5
Downloads
19
Makes
0
Views
73
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

There are a ton of these, but many times the dimensions are not equal for each 'bay' or compartment.  I used this layout for a basic idea: https://www.printables.com/model/462741-glock-beretta-magazine-holder, but I built it from scratch (TinkerCad).  I needed a new one for the brands/models listed.

The outside edges are chamfered, and I ensured the compartments are all dimensionally the same as well as confirming it will hold several different brands of Glock 19/17 magazines and my Beretta APX A-1 Compact/Tactical.  There is extra space on both dimensions/sides, so, oriented in the same direction, it holds the magazines base up and the bases will not collide (may touch) on either side, short or long way. 

I have a number of different brands I shoot for sport and use these type of holders to organize magazines by brand and model.  Often the wells are not standardized in size and do not hold a number of the same type. Height (like the difference between a G19 and G17) shouldn't be an issue as long as they are not curved/bayonet style. Other brands may fit, like my CZ mags are a bit more slender and will fit, as well as some Springfield. There is a 6 well and 4 well (cut down from the 6 well model).  The holes are just to save a little filament though it slows the print a little bit.  On my FLSun T1 Pro, the 4 bay shows about 2 hours and 74 grams of PETG.  On my QIDI Q2, it's about 3 hours, and 63 grams.  The T1 Pro is just that much faster (slowed down to 50% in the areas with holes).

Let me know if I missed a sizing and which part is off.  I struggled to find one equally dimensionally accurate in all of the mag wells so I hope this is helpful to all.

Tags