Prusa Advanced Filtration to Nispira 3-in-1 HEPA Carbon Filter Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to allow the use of Nispira 3-in-1 HEPA Carbon filters in the stock Prusa Advanced Filtration housing.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I added the Prusa Advanced filtration module on to my core one but I was disappointed to see the cost of the filters after shipping to the USA, and the general lack of availability.
I found these Nispira 3-in-1 HEPA Carbon filters (https://amzn.to/4s1hZXh), which actually look just like the Prusa units but are just a little smaller. In the USA I could buy at least five of these for each Prusa filter once I factor in shipping / etc.
Since the filters are a little smaller, they require an adapter to fit into the Prusa Advanced filtration housing. That's what this is :)
Print this adapter, and add your favorite low density foam tape around the outside (I used https://amzn.to/4qOQ5Nc), slide the filter into the inside, and push it into the standard advanced filtration housing. Easy as that.
I printed this on the core one out of Overture PETG filament using the Prusament PETG profile on the 0.25mm SPEED profile - fits like a glove.
Enjoy.