Gridfinity Holder for Alcohol Jar, Nozzle Brush & Snap Rivet Remover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity holder for alcohol jar (~40mm), nozzle brush and Core One Snap Rivet Remover.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom Gridfinity holder designed for:
Alcohol (IPA) jar (~40 mm diameter)
Brass nozzle cleaning brush (AliExpress-style handle brush like in this set)
Core One Snap Rivet Remover by Magmabow
Designed specifically for the Core One Side Storage I made:
Size
Non-standard 2 × 1.5 Gridfinity units, optimized for the narrow Core One side compartment.
The alcohol container pocket fits jars with a diameter of approximately 40 mm.
The brush slot is designed for common brass nozzle brushes with a twisted wire handle.
Magnets
Designed for 6 × 2.55 mm magnets
Hole diameter: 6.1 mm
Hole depth: 2.6 mm
Tight press-fit — no glue required.
Check out my Gridfinity collection for more custom holders and organizers I made.