Cabinet door hook (17mm door thickness)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This hook can be used on cabinet doors with the thickness of approximately 17mm
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I created this model in order to be able to hang things from cabinet doors.
It is nominally designed for doors with 16-17mm thickness.
There are 2 variants.
Variant 0deg: the door is clamped with using parallel elements. Can have some play unless the door is exactly 17mm thick.
Variant 3deg: the door is clamped using a vertical side and the back side has a draft of 3 degrees. This hook would be snug on on doors from 16 to 17mm.
Can be printed on the side without supports. Any material would work, but I assume PETG could be more suitable depending on the load/duty.