Cabinet door hook (17mm door thickness)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This hook can be used on cabinet doors with the thickness of approximately 17mm
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
I created this model in order to be able to hang things from cabinet doors.
It is nominally designed for doors with 16-17mm thickness.
There are 2 variants.
Variant 0deg: the door is clamped with using parallel elements. Can have some play unless the door is exactly 17mm thick.
Variant 3deg: the door is clamped using a vertical side and the back side has a draft of 3 degrees. This hook would be snug on on doors from 16 to 17mm.
Can be printed on the side without supports. Any material would work, but I assume PETG could be more suitable depending on the load/duty.