Hypercube EVO Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa hasn't built a large printer yet, or I would own it. Using my MK3s(s), I've built a Hypercube EVO.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 1103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Prusa hasn't built a large printer yet, or I would own it. Using my MK3s(s), I've built a Hypercube EVO. The extruder uses the E3D Hemera Extruder.
Print instructions
Prusa hasn't built a large printer yet, or I would own it. Using my MK3s(s), I've built a Hypercube EVO. The extruder uses the E3D Hemera Extruder.
- The design uses 4ea 3mm pins and a single bolt to hold the extruder in place. Real easy maintenance.
- Pinda probe can be used with or without the part cooling attachments
- Part cooling can be added through the Pinda Probe (creating an optional part cooling attachment for the opposite side of assembly).
- Tried to minimize the X loss due to the wide extruder
I tried to reuse as many parts as possible from other E3D Hemera designs.
Included Reused Files:
- Hypercube EVO by Scott_3D
(https://www.thingiverse.com/thing:2254103) - Part Cooler by cthulhulabs
(https://www.thingiverse.com/thing:2816980) - Fan Mount and Strain Relief by Tom Sanladerer
(https://www.prusaprinters.org/prints/12763-e3d-hemera-upgrade-for-the-anet-a8)
Original Files:
- E3D Hemera Mount (extruderbase.stl)
- Pinda Probe Mount (pindaprobemount.stl)
Still a work in progress as of 1/1/2020
All parts printed on Prusa MK3s in PETG with Bontech Extruder. 15% infill and no supports.
To do:
1) Make part cooler support for the opposite side of rails to provide a bit better balance - Completed.
2) Add the second extruder
3) Potentially add a second optical end stop sensor for the other side of X