Hypercube EVO Extruder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.44 – €7.88 net (excluding VAT)
For file: e3dhermeaparts_015mm_pet_mk3s_bondtech_5h39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.16 excluding VAT (range midpoint).
- Weight reported by the author
- 130 g
- Print time reported by the author
- 5.64 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Prusa hasn't built a large printer yet, or I would own it. Using my MK3s(s), I've built a Hypercube EVO.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 47
- Makes
- 0
- Views
- 1,103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Prusa hasn't built a large printer yet, or I would own it. Using my MK3s(s), I've built a Hypercube EVO. The extruder uses the E3D Hemera Extruder.
Print instructions
Prusa hasn't built a large printer yet, or I would own it. Using my MK3s(s), I've built a Hypercube EVO. The extruder uses the E3D Hemera Extruder.
- The design uses 4ea 3mm pins and a single bolt to hold the extruder in place. Real easy maintenance.
- Pinda probe can be used with or without the part cooling attachments
- Part cooling can be added through the Pinda Probe (creating an optional part cooling attachment for the opposite side of assembly).
- Tried to minimize the X loss due to the wide extruder
I tried to reuse as many parts as possible from other E3D Hemera designs.
Included Reused Files:
- Hypercube EVO by Scott_3D
(https://www.thingiverse.com/thing:2254103) - Part Cooler by cthulhulabs
(https://www.thingiverse.com/thing:2816980) - Fan Mount and Strain Relief by Tom Sanladerer
(https://www.prusaprinters.org/prints/12763-e3d-hemera-upgrade-for-the-anet-a8)
Original Files:
- E3D Hemera Mount (extruderbase.stl)
- Pinda Probe Mount (pindaprobemount.stl)
Still a work in progress as of 1/1/2020
All parts printed on Prusa MK3s in PETG with Bontech Extruder. 15% infill and no supports.
To do:
1) Make part cooler support for the opposite side of rails to provide a bit better balance - Completed.
2) Add the second extruder
3) Potentially add a second optical end stop sensor for the other side of X