Fossil Killing Claw Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Casting Mold for a 3-inch Velociraptor Killing Claw
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
Casting Mold/Form for a 3-inch Velociraptor Killing Claw: if you'd like a killing claw similar to those shown in the Jurassic Park film, print at 200% for an around a 6-inch claw.
When both halves are pushed together, they resemble a rock/stone where fossils could be found. Recommend making the claw twice, and the mold can be a display( working on a displaying stand, will update when completed)
Print Tips:
-25-30% infill, as you would need to clamp/push the mold halves together until the plaster hardens
-Print with 3-4 walls to prevent plaster from leaking into the print
-Print with support, as some details in the mold are overhangs
-For best results, print halves separately
-Alignment Pins may need further adjustment, dependant on
-Estimated Total Print time is between 6-7 hours