Fossil Killing Claw Mold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Casting Mold for a 3-inch Velociraptor Killing Claw
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 24
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
Casting Mold/Form for a 3-inch Velociraptor Killing Claw: if you'd like a killing claw similar to those shown in the Jurassic Park film, print at 200% for an around a 6-inch claw.
When both halves are pushed together, they resemble a rock/stone where fossils could be found. Recommend making the claw twice, and the mold can be a display( working on a displaying stand, will update when completed)
Print Tips:
-25-30% infill, as you would need to clamp/push the mold halves together until the plaster hardens
-Print with 3-4 walls to prevent plaster from leaking into the print
-Print with support, as some details in the mold are overhangs
-For best results, print halves separately
-Alignment Pins may need further adjustment, dependant on
-Estimated Total Print time is between 6-7 hours