Creality Ender 3 V3 CoreXZ Gantry-mounted Filament Guide with bearing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on filament guide with a 608 bearing, designed for the top gantry. Improves filament routing and reduces drag — ide
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 103
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A clip-on filament guide designed to mount on the top part of the printer gantry.
No mounting hardware is required — the base is shaped to fit tightly over the gantry casting and is secured in place by integrated rear locking tabs.
The guide uses a standard 608 ball bearing to ensure smooth, low-friction filament movement.
This model was created to replace the awkward stock filament path, while also taking into account limited vertical clearance inside an enclosure, where mounting the spool above the printer is not possible.
In my setup, this guide is used together with my extrusion-mounted filament guide with filter
, allowing the filament to be routed cleanly from the corner of the enclosure to the extruder.