Dry Box for 3Kg rolls V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dry Box for Polymaker 3KG rolls of filament
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I typically use 3kg rolls of PetG from Polymaker, i did not see any dry boxes that would fit this size roll, so i made a fairly simple one to print on the PrusaXL. The door is held on with Magnets, stronger magnets might be an upgrade for the door. The Humidity sensor is a tight fit.
I added a spacer box to be placed infront of the spool holder, otherwise the filament roll gets pulled right up to the front against the wall, making the extruder do more work.
Thinking of making a smaller one for normal size rolls.
BTW a 3kg roll I built this for is 120mm x 250mm
it uses:
8 - 20x2mm magnets
https://www.amazon.com/dp/B0DD73NMR5?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
1 Mini Hygrometer Indoor Humidity Meter
https://www.amazon.com/dp/B0CJM5R5N6?ref=ppx_yo2ov_dt_b_fed_asin_title
And i used the Pneumatic fitting and PTFE tube to connect tothe printer from:
https://www.amazon.com/dp/B0DPFX91M3?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
The spool holder frame I did copy, but i created a new roller for it, not really necessary but i had it.