Armattan Rooster VTX/Receiver Antenna Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I broke one of the receiver antenna tube nipples and decided to print my own. However after printing I discovered that…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I broke one of the receiver antenna tube nipples and decided to print my own. However after printing I discovered that my TPU wasn't flexible enough to fit through the holes of the stock carbon fiber plate. Therefore I designed a replacement plate that included the antenna tube nipples.
I am using the printed plate by itself. But you can also put it over the stock carbon plate if your VTX antenna barrel is long enough.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
.20
Filament: . TPU Black
Notes:
Go easy on the infill or it will make it difficult to insert the antenna tubes.
Print with the back down against the bed.
Category: R/C Vehicles