1 / 3
LEGO Forgot This Part. I Didn't. (Happy Plants 10349) — zdjęcie 1
1 / 3

LEGO Forgot This Part. I Didn't. (Happy Plants 10349)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

LEGO® Happy Plants # 10349 says let them hold hands -but they couldn't! Now they can. 🩷

Ocena
0 / 5
Polubienia
9
Pobrania
22
Wydruki
0
Wyświetlenia
139
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

LEGO® Happy Plants #10349 - Handshake Connector

The LEGO® Happy Plants set (#10349) literally shows these two adorable plant pals nearly holding hands on the box cover. The instructions even tell you to let them hold hands.

There's just one problem: LEGO didn't include the part to make it happen.

I stared at two plants that could clearly see each other's hands but couldn't quite reach, and I did what any reasonable person would do: I spent two hours in Autodesk Fusion designing a tiny axle connector instead of just...moving on with my life.

The result is a small parametric axle stub with a fully-filleted collar that sits right between their hands like a little pink handshake. Print it in pastel-magenta and it looks intentional. Print it in any other color and it'll probably still work, but you'll feel slightly worse about your life choices. Or perhaps you'll find an even better color combination than I did! Who knows‽

No supports. No rafts. Print upright. 0.1mm layer height for best fit in the axle holes. Done.

Print Settings:

  • Layer height: 0.1mm

  • Supports: None

  • Orientation: Upright, collar in the middle

  • Infill: 50% (it's tiny, go wild)

Important note: When printing multiples on my Bambu X1C, fast travel moves between parts caused my prints to spider out. Print one at a time for best results. The collar may have a very slight sag, but it still works great. If you want a perfect match to the model, slow your print speed down and print solo.

Now go let your plants hold hands. They've been waiting long enough. 🩷🌱🤝🌱

Tagi