Elegoo Centauri Carbon - Magnetic Purge Trash Bin with Insert for easy removal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple purge line bin for the inside of the Elegoo Centauri Carbon
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I made this magnetic purge line trash bin to mount inside the printer to have a place for the purge lines. It attaches with magnets to the inner wall, so you can install or remove it in seconds without tools.
There’s also a removable insert, which makes emptying super easy — just pull it out, dump it, and put it back.
Magnets
Size: 8×3 mm
The slots are a tight press fit, but I glued mine in for extra security.
I designed to model for 4 magnets but less may also work
Printing notes
The bin itself prints normally.
The insert has a long vertical pole that can wobble a bit if you print fast.
I printed mine in sport mode and got some minor artifacts, but it still works perfectly.
For cleaner results, just slow it down a bit or reduce acceleration.
Hope it’s useful! If you improve it, feel free to share 👍