1 / 5
Women’s shoe heel tips (24×17 mm and 34×35 mm sizes) — zdjęcie 1
1 / 5

Women’s shoe heel tips (24×17 mm and 34×35 mm sizes)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flexible replacement heel tips for women’s shoes – two sizes to fit different heel widths.

Ocena
0 / 5
Polubienia
6
Pobrania
20
Wydruki
0
Wyświetlenia
107
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Women
Licencja
Creative Commons — Attribution

CZ

Jednoduché náhradní podpatky do dámských bot ve dvou velikostech (24×17 mm a 34×35 mm). Model je určený pro tisk z pružného materiálu (TPE/TPU), aby lépe tlumil došlap a měl lepší přilnavost než tvrdé plasty.

Tisk a doporučení:

  • Tiskni rovnou stranou na podložce (flat side down).

  • Pro spolehlivější tisk z flexibilu doporučuji tisknout s ochranným válcem kolem objektu (stabilita/ochrana hran) – je už součástí přiloženého G-code i 3MF.

  • Po tisku je ochranný válec určený k jednoduchému odtržení.

  • Pokud je fit moc těsný nebo volný, pomůže jemné škálování 98–102 % podle konkrétních bot.

  • Podle typu bot může fungovat natěsno, případně lze použít kontaktní lepidlo pro jistější držení.

Ověřené nastavení tisku:

  • Materiál: Gembird TPE

  • Infill: 100 %

  • Výška vrstvy: 0,2 mm

  • Tryska: 0,4 mm


EN

A simple set of replacement heel tips for women’s shoes in two size variants (24×17 mm and 34×35 mm). Designed to be printed in a flexible filament (TPE/TPU) for better grip and shock absorption compared to rigid plastics.

Printing notes & tips:

  • Print with the flat side on the build plate (flat side down).

  • For more reliable flexible prints, I recommend printing with a protective cylinder around the object (stability/edge protection) – it is already included in the provided G-code and 3MF.

  • After printing, the protective cylinder is meant to be easily torn off.

  • If the fit is too tight/loose, try a small scale adjustment (98–102%) depending on your shoes.

  • Depending on the shoe type, it can be a press-fit, or you can use contact glue for extra hold.

Tested print settings:

  • Filament: Gembird TPE

  • Infill: 100%

  • Layer height: 0.2 mm

  • Nozzle: 0.4 mm

Tagi