1 / 5
Women’s shoe heel tips (24×17 mm and 34×35 mm sizes) — image 1
1 / 5

Women’s shoe heel tips (24×17 mm and 34×35 mm sizes)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Flexible replacement heel tips for women’s shoes – two sizes to fit different heel widths.

Rating
0 / 5
Likes
6
Downloads
20
Makes
0
Views
108
Reviews
0

Updated at source:

Model information

Category
Women
License
Creative Commons — Attribution

CZ

Jednoduché náhradní podpatky do dámských bot ve dvou velikostech (24×17 mm a 34×35 mm). Model je určený pro tisk z pružného materiálu (TPE/TPU), aby lépe tlumil došlap a měl lepší přilnavost než tvrdé plasty.

Tisk a doporučení:

  • Tiskni rovnou stranou na podložce (flat side down).

  • Pro spolehlivější tisk z flexibilu doporučuji tisknout s ochranným válcem kolem objektu (stabilita/ochrana hran) – je už součástí přiloženého G-code i 3MF.

  • Po tisku je ochranný válec určený k jednoduchému odtržení.

  • Pokud je fit moc těsný nebo volný, pomůže jemné škálování 98–102 % podle konkrétních bot.

  • Podle typu bot může fungovat natěsno, případně lze použít kontaktní lepidlo pro jistější držení.

Ověřené nastavení tisku:

  • Materiál: Gembird TPE

  • Infill: 100 %

  • Výška vrstvy: 0,2 mm

  • Tryska: 0,4 mm


EN

A simple set of replacement heel tips for women’s shoes in two size variants (24×17 mm and 34×35 mm). Designed to be printed in a flexible filament (TPE/TPU) for better grip and shock absorption compared to rigid plastics.

Printing notes & tips:

  • Print with the flat side on the build plate (flat side down).

  • For more reliable flexible prints, I recommend printing with a protective cylinder around the object (stability/edge protection) – it is already included in the provided G-code and 3MF.

  • After printing, the protective cylinder is meant to be easily torn off.

  • If the fit is too tight/loose, try a small scale adjustment (98–102%) depending on your shoes.

  • Depending on the shoe type, it can be a press-fit, or you can use contact glue for extra hold.

Tested print settings:

  • Filament: Gembird TPE

  • Infill: 100%

  • Layer height: 0.2 mm

  • Nozzle: 0.4 mm

Tags