Universal Cable Holder – Velcro Mounted (Desk / Wall / Anywhere)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and versatile cable holder for clean cable management, designed as a robust 3D-printable mounting part.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The cable bundle is secured using a double-sided Velcro strap (max width 15 mm) that threads through the holder.
The holder itself is then screwed to a surface, making it suitable for multiple mounting locations:
Under a desk
On a wall
On the side of a cabinet
Under a workbench
Inside a rack
Or any flat surface
This is not limited to under-desk use — it’s a universal screw-mounted cable organizer.
🔧 Key Features
Designed for double-sided Velcro straps (max 15 mm width)
Mounting with Ø 3 mm screws (minimum length 10 mm)
Strong and simple design
Fully 3D printable
Suitable for permanent or adjustable cable setups
🖨 Recommended Print Settings
Perimeters (walls): 3+
Infill: minimum 20%, recommended 30–50%
Layer height: 0.2 mm
Supports: not required
Material:
PLA – standard indoor use
PETG – recommended for higher strength and durability
🧩 Installation
1 Thread the double-sided Velcro strap (≤ 15 mm width) through the holder
2 Wrap it around the cable bundle and tighten
3 Position the holder on the desired surface
4 Secure it using Ø 3 mm screws (minimum 10 mm length)