Prusa Mini Rubber Feet Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved Prusa Mini feet, printed in flexible filament.
- Ocena
- 4,895 / 5
- Polubienia
- 158
- Pobrania
- 1066
- Wydruki
- 16
- Wyświetlenia
- 6672
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Prusa Mini is delivered with foam pads as feet. 4 feet is mounted on the frame and one on the bottom of the electronics box.
My two models is a replacement for all feet, 4 on the frame and one on the bottom of the control box.
The feet is higher to protect the display cable from damage and avoid the screws in the control box from scratching the surface under the printer.
Needs to be printed in TPU or other flexible material.
>> Please leave a like and make me happy… :) Thank you!
Print instructions
Resolution: 0.20mm
Infill: 10% Gyroid (important for flexibility)
Filament: Devil Design TPU White
2 perimeters, 6 top and 5 bottom layers.
Or use the 3mf that has all settings and models
The models can be printed in NinjaFlex on a MK3S/+ with the Filatech FilaFlex40 profile - transparent model on the photos. I have provided a 3mf file for that ;-)
Post-Printing
The 4 feet can be pushed into the frame.
The foot under the control box has to be glued in.