GTRacing Gaming Chair Arm rest replacement (TPU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed made in TPU for arm replacement
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this model for my GTRacing chair's rest replacement because the original is worn out. I don't want to buy a replacement from the internet (money...), but I have TPU around in my home, and I printed it with Channel Prime Alliance filament, TPU98A in red. It does work and flawless.
NOTE: I made this split model because I wanted to print with two different % infills. The bottom, or 50%, is harder because it is best to set it as the base. The top one is 8% or a little less as your choice.
Setting:
Infill: Gyroid, 8% and 50% (SEE THE 2ND PICTURE).
Speed: 30 mm/s and first layer - 10mm/s
Nozzle temp: 235. Bed temp: 0
Support: Yes, tree. (SEE THE 2ND PHOTO)
Brim: Yes, 5mm
Orientation: 45DEG
Happy printing!