GTRacing Gaming Chair Arm rest replacement (TPU)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printed made in TPU for arm replacement
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this model for my GTRacing chair's rest replacement because the original is worn out. I don't want to buy a replacement from the internet (money...), but I have TPU around in my home, and I printed it with Channel Prime Alliance filament, TPU98A in red. It does work and flawless.
NOTE: I made this split model because I wanted to print with two different % infills. The bottom, or 50%, is harder because it is best to set it as the base. The top one is 8% or a little less as your choice.
Setting:
Infill: Gyroid, 8% and 50% (SEE THE 2ND PICTURE).
Speed: 30 mm/s and first layer - 10mm/s
Nozzle temp: 235. Bed temp: 0
Support: Yes, tree. (SEE THE 2ND PHOTO)
Brim: Yes, 5mm
Orientation: 45DEG
Happy printing!