1 / 1
Mellow Sexball/Sexbolt relocation for a Voron v2.4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mod to relocate the probe uptop the bed extrusion for a Voron v2.4
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
This mod relocates the mellow sexbolt probe uptop the bed extrusions on a V2.4. The primary goal is to make performing tool_offset_calibrate on a Stealthchanger more reliable when tuning z offset where the tool press fully on the probe to activate the Tap pcb.
BOM
4 x M5 x 10mm screws
2 x M3 x 16mm screws
2 x M3 heatset inserts
2 x M3 roll in tnuts
2 x m5 roll in tnuts