Drying and Storage Rack for Naniwa Chocera Stones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made to fit Naniwa Chocera Pro stones measuring 210x70x20mm. Narrower stones will work, but it will be a loose fit.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This design heavily inspired (i.e: shamelessly stolen) from a post over on r/sharpening. Slightly modified from the original of course since I was working from photos, but I think I made some minor improvements.
I added some recesses in each slot for the stone to fit snugly in to prevent jostling around. Obviously this benefit will fade over time as the stones wear from use/flattening.
Instead of feet (I'm not even sure how he printed that without supports), I raised up the resting position of each stone to give the water somewhere to go, and made the base flat for ease of printing.
Even though the stones are elevated and won't sit in standing water, I'm just now realizing that the lack of feet will prevent water from easily escaping the perimeter of the rack.
Maybe I'll rework it in v2 and add drains in the bottom, or add optional feet that can be printed separately and attached.
Credit: u/Cheap-Shallot-6375 on Reddit