Icon Torx Bit Holder | T55 - T8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bit holder specifically designed for Icon Torx T55 to T8 Numbered, with numbers pointing upwards for easy reading
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Designed to be made with TPU, or maybe flexible PLA, I haven't tested it with flexible PLA. I highly discourage printing with any non-flexible filament, as the holes are specifically designed to be slightly smaller than the torx bits, so it stretches and holds on, as anyone with the Icon Torx bits knows that what it comes with sucks when thrown into a bag, or truck floor etc. cause they fly all over the place.
The first hole is also made slightly smaller, as for some reason Icon decided the T55 should have a slightly smaller outer diameter.
I also recommend making the infill 20%-25% just to add a little stiffness to grab onto the bits a little harder.