Liczymy pasujące modele…
Model To prevent fast dry out of your started silicone/acrylic cartouche print this cap and screw it onto your cartouche. The cap has a conic inside to close the opening better as just a plain cap. Printing instructions I used PLA but…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
Wydruk około 7,95 €–9,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7540265970645110038 ℹ Discription: This chibi-style Ghostface figure was custom-designed to blend playful proportions with…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu
I made my own first layer calibration with a bigger center square and horizontal infill and 45 degrees infill for the corner and side squares. This way you can easiely dial in your live z for the center and look at the difference early.…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A set of six spreader plates for smooth and consistent silicone finishing. Three plates feature concave radii (fine, standard, large) for common inner corners and joints. One plate has convex radii for outer corners, and two plates are…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 19.10.2024: EN Notice: Since I remixed my Front Nozzle holder before the release of Krys own A1 version, it is compatible with Krys ‘A1 mini’ purge catch tray. So please combine my A1 remix with Krys PrusaXlFrontNozzlePurgeA1Mini…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
Use brim for cartridge body + 3 walls. A fully 3D printed applicator for silicone, caulk, sealant, adhesives, and other standard cartridge-based materials. The tool is designed as an alternative to a classic caulking gun and uses a…
Wydruk około 9,40 €–11,49 € nettoWstępna wycena jednego wariantu
This model is a sleek, rounded cube featuring a minimalist WiFi icon embedded on the front. The design combines a red base with contrasting black WiFi signals, creating a visually striking and modern look. Perfect for use as a keychain,…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
NO software modification are required if you have a K1C Just print, glue up the original silicone brush and screw the bracket in place reusing the 2 carriage screws. Now you can use whatever plate you want. I have included a brush mold…
This tool features interchangeable head pieces , allowing you to choose the finish that best suits your project. Two head styles: Chamfer – creates a clean, angled finish Round – produces a smooth, curved joint Each style comes in three…
I printed mine in PLA, no support and in 0.20 mm
The silicone tube/cartridge/cartouche cap helps silicone is not drying after usage See also the version with protector for cartridge and applicator: https://www.printables.com/model/1135314-protector-for-silicone-cartridgecartouche-applicat
Ich hasse es wenn die kurz benutze Silikon Kartusche beim nächsten Mal ausgetrocknet ist... Somit hier ein Verschluss. Damit es optimal dichtet einfach ein Gummiband vorab auf das Gewinde geben (muss aber nicht sein). Der Verschluss ist…
Stand for MacBook Pro 2021 14 / 16 (M1 Pro, Max ) Upon looking at the sizes for the M2 MacBook Pros, this stand should still work, though I don't have a computer to test it. Printed in PLA 0.2mm Layer height 10% cubic infill No supports…
I use these logos and icons to add to other projects. Simply drag and drop the stl(s) into an existing project, scale to size, then combine (assemble) them with the model. Great for MMU/AMS printing!
This is a very high detail model of a US Navy Ticonderoga class cruiser (CG) recommend 1.0 layer height or better and support blocks for the masts otherwise it is very hard to get the supports off without ripping off the mast.
Capture the stylish spirit of Italian mobility with this 3D printable STL model of a Vespa Scooter. This iconic scooter model is perfect for enthusiasts of classic European design and city cruising, offering a charming piece for their…
This is a remodel of the Flipper Zero case. It uses groove to fit flipper zero with its silicone case and also deeper groove for text so it can be easily inserted and printed. Its print with no supports you gonna need 8 M3x20 screws.
Included stls for all the classes except evoker. Thanks to @MichalBasler for the project files with the models painted for MMU and photo.
Own a piece of automotive legend with this 3D printable STL model of the Volkswagen Beetle. This iconic classic car model is perfect for automotive enthusiasts and fans of beloved German engineering, showcasing timeless design and…
Here is my solution for a silicone caulking tool. I'm rather satisfied with the results in my kitchen, so feel free to try ! Several chamfer sizes are available (I used 6mm). I believe that this shape design makes it easier to succeed in…
This is my approach to create the cover of the Necronomicon Ex Mortis of the Evil Dead Franchise. https://www.youtube.com/watch?v=9vqbrGIrRLU This is done by printing the structure, glueing it to card board and put thin artificial leather…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is half of a cable spool, I use it for underware cable management on larger and heavier cables. I noticed that the hook in the main model was only available for 25mm multiboard, so I recreated and adapted. It's made in openscad so It…
Experience the joy of pure driving with this 3D printable STL model of the Mazda Miata MX-5. This iconic lightweight sports car model is perfect for automotive enthusiasts and roadster fans looking to display the legendary handling and…
Having backed the Slice engineering Copperhead on Kickstarter I found myself in need of a silicone sock for the hotend. As Slice do not sell socks I decided to cast my own using the ever awesome @CNC_Kitchen's video as a guide. The mold…
Thanks to the amazing work of ScottYu-Jan and OVERWERK we have a cool stand for the iPhone. Marlfox did an amazing job by using parameters in Fusion to be able to adjust the size. What i did here is just figuring out the best size for the…
The famous Geometry dash cat Icon; now a miniature 3d model!! This miniature model is designed to look like the cat from the video game Geometry Dash . AMS file and STL file included! No Supports needed! print stripes with a darker color…
A small single dosing hopper for the Baratza Encore ESP. Most hoppers have no possillity for a bellow, so I designt this one to fit a bellows like that one from AliExpress Put the gasket from the grinder in the hopper first, than the…
Travel back in time with this incredible 3D printable model of the legendary DeLorean Time Machine from "Back to the Future," presented as if undergoing a dramatic reveal, covered in a sleek black cloth. This model is a must-have for fans…
ABS/PETG Wall thick 1mm so that the printing process is faster but stronger. Diameter 10mm
Bottle holder for the Multiboard using the Multiconnect system. Various sizes includes but the model is online with Onshape and is parametric. Use the URL and change the variable ‘size’ to whatever value you like. The fillets may need…
I printed in pla 0.3 layers i removed infill from the “front” of the “wings” so it'll be more “snappy” required atleast 1 multiconnect connector (2 recommended)
Silicon Finisher finishes silicon so it looks clean and tidy.
I create this token to put on top of any car when some of them is on fire. The game provides you a fire cardboard token to put on the table but nothing over the cars, so I give you this idea. You need to print 2 small flames and 1 big…
When I purchased my Bed Spring kit for Creality machines I failed to remember that one spring is shorter to accommodate the bed wiring strain relief bracket on the Ender 3. So a spacer is needed for proper installation on the Ender 6.…
Defcon Security Conference icon in 3D. 5mm high.
Iconic Movie Moments - The Birds - Melanie Daniels Attacked - 1963
These are an alternate version of my openGrid Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect…
I was got tired of guessing in error a few times which cost me a bunch more time. Printed with a filament change at 1mm Reading degrees; 3 lines closest to hole are 45 deg sequencing 0, 45 & 90 8 Hollow lines are in 10 deg increments,…
Add a touch of classic automotive charm to your collection with this 3D printable STL model of a Mini Cooper. This iconic compact car model is perfect for car enthusiasts looking to display a beloved and stylish vehicle in their miniature…
These are an alternate version of my openGrid Lite Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in…
Introduction: This print is used to create silicone molds that afterwards can be used with concrete, gypsum, resin, wax and other casting materials. Basically it's a printed “positive”, you have a box and a design inside, the silicone…
Iconic Movie Props - The Hunger Games - Mockingjay Pin - 2012
DIY, non-abrasive silicone brush and the included Klipper macro let you fully automate nozzle cleaning. The design mounts to the side of a bed extrusion and is not symmetric, but you can mirror it in your slicer to shift the mount…
This is a holder design specifically for this KVM model (not affiliate) that you can buy from Amazon. Multiconnect is used for the connecting interface and it align with openGrid's 28mm grid size.
ADDED: Martial Artist, KF1 logo, and KF2 logo. These are 35x35mm icons ready to go on a keychain. I recommend a color change at layer height 3.2mm for maximum effect. I do not own the rights to KillingFloor2 or any symbolism therein.
Iconic Movie Characters - Schindler's List - Oskar Schindler & Amon Goeth - 1993
This is a simple spray bottle holder for use with MultiBuild plates. You need 2 of the MultiConnect connectors. Fits bottles up to 3mm wide at the trigger / head. No supports needed.
Mount a powerstrip with the keyholes to multiconnect. Multiconnect cutout is open so that it can be flexible to mounting locations of the multiconnector. I put the printed part on to the powerstrip first then slide it onto the…
Celebrate a true rally legend with this exceptional 3D printable model of the Lancia Stratos, presented in a captivating reveal, draped in a sleek black cloth. This model is ideal for motorsport enthusiasts, classic car collectors, and…
I needed a gasket for a bathroom repair. There is a similar customizer thing but did not had all setting I wanted, so here is another version.
https://cult-of-the-lamb.fandom.com/wiki/Knucklebones Base Game Print This is the included 3D Print. It's print-and-place so that you can do it all in one go. Dice You'll need a total of 17 normal-sized D6 dice.
If you use silicone dampers on your heated bed instead of the springs, the original bed holders are too small. So here is the modified version suitable for the silicone dampers Category: 3D Printer Accessories
NOTE: The sock in the images is all cut up from having to snip off a bunch of extra silicone in order for it to fit around my Ender 3 X-gantry bracket. Following the absolutely excellent video by CNC Kitchen here, I was able to design a…
I needed a way to hold my "wiring closet" components (switches, modems, power strips, power adapters) to my MultiBoard wall with MultiConnect connectors. I originally made this Fusion model to be screwed in, but then I found…
A sphericon is a funky-looking, smooth, and wobbly shape that’s kind of like a mix between a ball and a weird rolling polygon. If you cut a polygon in half, flip one of the halves, and glue them back together, you get the base shape of a…
This is a hard case for storing the flipper zero and its silicone case. I printed this with: Filament: Overture PETG Bed temp: 80C Nozzle temp: 240C Infill: 10% Layer height: .2mm Print with the flat sides down. I did not use any support…
A sphericon is a funky-looking, smooth, and wobbly shape that’s kind of like a mix between a ball and a weird rolling polygon. If you cut a polygon in half, flip one of the halves, and glue them back together, you get the base shape of a…
Simple compass icon that can be embedded in maps
Simple Camera Icon for Embedding
| BASIC DESCRIPTION | this is a coin/badge/symbol/icon that can be seen in a battle arena of Earth Rumble - Avatar: The Last Airbender it was modeld using the scenes from the episode “The Blind Bandit” there are 3 sets: Single Part -…
A tool for easy silicon application within different sized corners Read more about useful 3D Print life hacks in my ebook: https://www.amazon.com/dp/B0FJHHZBHM
Big thank you to Stefan for the original design. I took the same approach and used the same concept for the silicone sock mold. The only difference is the thickness, which I increased from 1.5 mm to 2 mm. The beveled version of the sock…
Basically speaks for itself. I was working much with BPMN diagrams and charts. Sometimes it's a nice help to have the basic icons on a cheatsheet nearby or just draw it with this little helper. It's all the basic shapes. But it nice to…
The under-desk hanger for my 8bitdo Ultimate 2C controller (likely fitting others too), for Multiconnect connectors with openGrid spacing (28mm). Bottom curve from this stand . Multiconnect slot from the modeling files . Dongle slot from…
Iconic Movie Characters - Parasite - Ki-taek - 2019
I’ve created a BETA openGrid MultiConnect Lock Snap_Looser / Remover to help loosen the threads on the MultiConnect system. This allows for easier installation and removal during assembly and disassembly. To Find BETA openGrid…
Holds M12 Tools via the battery slot to multiboard with the multiconnect system
What can I say - I did my best 🤪. My favorite is the MMU3 version (the one on the picture): it is printable without supports.. .
Widget inutiles donc indispensables. A assembler par collage (cyano) en les décalant de 90° (carré) ou 60° (hexa), leur permettant de rouler sur une surface lisse. Impression en PLA, vous pouvez mettre en épaisseur variable entre 0,1 et…
Completely redesigned the insert from scratch, but this time allowing for the shape and size of the flipper without the case, and giving a decent hole to be able to pull it out of the case. No obligation at all, but if you like this…
ghmnfgljsflkjg,jsdfkgjgikjnouzhbnhgbgitughbjgtuzgbgnfrjiufghbnfmkfgubhngfmiguhfnmfjbugfhbdnvjfuhedbvngjfgvbdnjvubhgfnmdk
Transfer the svg files to Prusa slicer, (not to the platform (for positioning in the center)), in the menu that opens, specify the depth of each svg file, configure the layer to change color. --IMPORTANT-- Select two models and click…
This is a simple drone icon that can be used to embed in prints.
A selection of the greatest paintings from history reimagined as printable silhouettes for minimalist home decor. The backdrop and foreground are swappable to create infinite combinations! Let me know in the comments if there are any…
Transfer the svg files to Prusa slicer, (not to the platform (for positioning in the center)), in the menu that opens, specify the depth of each svg file, configure the layer to change color. --IMPORTANT-- Select two models and click…
Remix of Rifle Wall Hanger Efficient by user ThePixelleer Added gun icons to the side of the hanger. Imported SVG found online to model with TinkerCAD. Gun icon models are Mac10 and AK47. Comment if you want a specific gun model on a…
The mold is for resin printing. It is designed with M11x1.5 thread to accept standard 60ml silicone containers (high temp silicone/engine gasket silicone) Mold release agent must be applied before injecting the silicone for easy release.…
A teabag dispenser that uses a multiconnect mount.
This is a build plate holder for MultiBuild that holds up to 5 3D printer build plates. Fits plates up to 1.3mm thick. Compatible with pretty much any brand of plate. You need 2 of the MultiConnect connectors.
Transfer the svg files to Prusa slicer, (not to the platform (for positioning in the center)), in the menu that opens, specify the depth of each svg file, configure the layer to change color. --IMPORTANT-- Select two models and click…
Elastic rubber mount for bicycle handlebars, designed for a front flashlight powered by an 21700 battery. Material: FLEX
Ever wanted to be an NPC during a Renaissance fair or convention? Well, now you can! With “!”, all you need is a headband to attach it to, and people will be able to know that you have something for them. You can even add a spring to make…
This custom-designed silicon tube stopper features a unique spike in the center, making it an ideal tool for both sealing and cleaning tubes. The spike assists in dislodging debris and ensuring the inside of the tube remains clear, while…
Silicone/Caulk Threaded Nozzle Cap for unthreaded nozzles
A simple holder to hold your chess pieces silicone molds while the resin cures. Print the top with the legs up, the labels should be small enough to not require supports, print the bottom with the recessed holes for the legs up. I used…
This original idea was on one for the Voron, but I liked it so much I use it on all my printers now. The goal of this design was to, in the spirit of open source, allow people to make their own silicon brushes using all DIY parts. In this…
I printed in pla 0.3 layers i removed infill from the “front” of the “wings” so it'll be more “snappy” required atleast 1 multiconnect connector (2 recommended)
Holds M12 Tools via the battery slot to multiboard with the multiconnect system
Take this Brawl Stars charm with you wherever you go with this fun and stylish keychain! Designed for fans of the game, this 3D-printed accessory features an iconic look that captures the essence of the game mode in a compact and…
Take this Brawl Stars charm with you wherever you go with this fun and stylish keychain! Designed for fans of the game, this 3D-printed accessory features an iconic look that captures the essence of the game mode in a compact and…
The devices icons for your fridge, just print in separate colors and slide them on! :) You will need circular 5x2mm magnets. Category: Decor
Un gratte ou lave buse réaliser à partir d'une plaque de silicone acheté sur l'enseigne ACTION! une plaque à 3€ et le tour est jouer dans le kit vous avez un gabarit pour decouper au cutter le silicone à la bonne taille. Vous avez aussi…
