1 / 2
Triple Solder or Wire Spool Dispencer HSW or Screw Mount — zdjęcie 1
1 / 2

Triple Solder or Wire Spool Dispencer HSW or Screw Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple triple dispenser for solder or small spools of wire designed for HSW (Honeycomb Storage Wall) or screws.

Ocena
0 / 5
Polubienia
4
Pobrania
10
Wydruki
0
Wyświetlenia
82
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

A simple dispenser for three spools.  Designed for  100g solder on the generic green spools commonly found on Amazon. Could also be used for small spools of wire. Spools with at least a 15mm internal diameter and no more than 60mm outer diameter should work fine. A version with M3 mounting holes with spacing to match the HSW as well as a version with holes for flat head wood screws are available.

Tagi