1 / 2
GT2 Belt 6mm to 3mm Cutting Jig
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig to cut 6mm GT2 belts into 3mm ones
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Open Community License v1
This jig allows you to split a 6mm GT2 belt into 2 3mm ones, with the use of a utility knife type of blade (but other blades can be used).
I had better results by doing several runs on the same section of the belt instead of trying to cut the belt in a single pass.