1 / 13
Voron 2.4 Under-bed Chamber Heater Air Deflector — zdjęcie 1
1 / 13

Voron 2.4 Under-bed Chamber Heater Air Deflector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Redirects airflow from under the bed away from the door and back to the main body of the chamber for better heating

Ocena
0 / 5
Polubienia
11
Pobrania
33
Wydruki
0
Wyświetlenia
492
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Front air deflectors for Voron 2.4 350mm bed printer.  Tested on 350mm LDO Rev. D.  kit with kinematic bed mounts, Nevermore filter and Z axis guards installed. The model can can be completely customized by editing the OpenSCAD file for different bed sizes and alternative bed/accessory configurations.  See https://www.printables.com/model/1613243-voron-24-under-bed-chamber-heater-5015-blower-fan for angled 5015 fan mounts.

You will need 4x M3x8mm screws and 4x T-nuts in addition to the printed parts for installation

Print with layer height of 0.2mm/layer, set layer height to 0.1mm from h=2mm to h=3.4mm for a smooth finish with default settings, change if the shape is altered.

Note: you will need the two SVG files originally from https://github.com/VoronDesign/Voron-Extras/blob/main/Images/Logo/SVG/Stripes_Logo.svg and https://github.com/VoronDesign/Voron-Extras/blob/main/Images/Logo/SVG/Hex_Logo.svg , both files with a GPL 3.0 license.  Put these in the same directory as the .scad file and rename them to "VoronStripes_Logo.svg" and "VoronHex_Logo.svg" respectively to make them work.  Or just download them as attached where they are already named correctly.

Tagi