1 / 13
Voron 2.4 Under-bed Chamber Heater Air Deflector — image 1
1 / 13

Voron 2.4 Under-bed Chamber Heater Air Deflector

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Redirects airflow from under the bed away from the door and back to the main body of the chamber for better heating

Rating
0 / 5
Likes
11
Downloads
33
Makes
0
Views
492
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

Front air deflectors for Voron 2.4 350mm bed printer.  Tested on 350mm LDO Rev. D.  kit with kinematic bed mounts, Nevermore filter and Z axis guards installed. The model can can be completely customized by editing the OpenSCAD file for different bed sizes and alternative bed/accessory configurations.  See https://www.printables.com/model/1613243-voron-24-under-bed-chamber-heater-5015-blower-fan for angled 5015 fan mounts.

You will need 4x M3x8mm screws and 4x T-nuts in addition to the printed parts for installation

Print with layer height of 0.2mm/layer, set layer height to 0.1mm from h=2mm to h=3.4mm for a smooth finish with default settings, change if the shape is altered.

Note: you will need the two SVG files originally from https://github.com/VoronDesign/Voron-Extras/blob/main/Images/Logo/SVG/Stripes_Logo.svg and https://github.com/VoronDesign/Voron-Extras/blob/main/Images/Logo/SVG/Hex_Logo.svg , both files with a GPL 3.0 license.  Put these in the same directory as the .scad file and rename them to "VoronStripes_Logo.svg" and "VoronHex_Logo.svg" respectively to make them work.  Or just download them as attached where they are already named correctly.

Tags