The Luftwaffle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cheeky pun on the German Air Force
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
Look out! It's the Luftwaffle!
My username is a pun about waffles and the German air force (Luftwaffe), figured I should bring that to life!
This is a model of the German BF109 fighter, with a silly waffle texture added.
The seams of the assembly are aligned with the waffle texture, so with a clean print they should be very well hidden.
You will most likely need supports for the tail unless you use a very small layer height.
Holes are present in each fuselage piece to use 1.75mm filament to join the pieces together, but I recommend using glue as well. The propellor clips into place (depending on the quality of the print the clip may need to be sanded a little). I attached the wheels using M3 bolts, but you could probably just glue them in place, they don't really roll much.
I hope you enjoy this silly little joke :)