The Luftwaffle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cheeky pun on the German Air Force
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 1
- Views
- 217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Share Alike
Look out! It's the Luftwaffle!
My username is a pun about waffles and the German air force (Luftwaffe), figured I should bring that to life!
This is a model of the German BF109 fighter, with a silly waffle texture added.
The seams of the assembly are aligned with the waffle texture, so with a clean print they should be very well hidden.
You will most likely need supports for the tail unless you use a very small layer height.
Holes are present in each fuselage piece to use 1.75mm filament to join the pieces together, but I recommend using glue as well. The propellor clips into place (depending on the quality of the print the clip may need to be sanded a little). I attached the wheels using M3 bolts, but you could probably just glue them in place, they don't really roll much.
I hope you enjoy this silly little joke :)