IKEA Melodi RGB mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A top and base mount to use the IKEA Melodi lamp shade a WLED/RGB-Led lamp. Top en base screw into each other holding…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A top and base mount to use the IKEA Melodi lamp shade a WLED/RGB-Led lamp. Top en base screw into each other holding both parts in place. I designed this to place the lamp on the floor and use it as a mood light. The power cord is guided through the top but can alternatively be guided down inside the lamp. In the base there is space for an ESP01(S) running WLED. Ive used a neopixel ring with 16 leds that is hold in place by the base with a tight fit
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20%
Notes:
My top was printed to cold and had some stringing inside.
Note that the 'white' shine on the last picture is only visible on the picture due to the exposure.
Category: Electronics