1 / 3
ZP6-A2 Hybrid: The "No-Solder" Hand Grinder Motorizer — zdjęcie 1
1 / 3

ZP6-A2 Hybrid: The "No-Solder" Hand Grinder Motorizer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple, accessible, easy-to-build combination of a Femobook A2 motor block and an 1zpresso ZP6

Ocena
0 / 5
Polubienia
17
Pobrania
87
Wydruki
2
Wyświetlenia
1112
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Idea


Most motorization projects require electronics knowledge, soldering, and sourcing sketchy electronic components. Not this one.

By leveraging the motor block of the Femobook A2, you get a high-torque, low-RPM motor with built-in automatic choke detection and auto-off. It’s the perfect starting point to transform your high-end hand grinder into an electric beast.

No hardware modification. The whole thing can be disassembled in seconds, and you get your ZP6 and A2 back as new.

Note: Designed specifically for the 1zpresso ZP6, but easily adaptable to most grinders by modeling a new collar.


The Drive Shaft Challenge

The main hurdle was linking the motor's 5mm female hex to the ZP6’s 6.35mm (1/4") male hex. Standard bit adapters are often too long or wobbly. I’ve documented two reliable solutions:

  1. The "Hybrid" way: A 1/4" female hex to 1/4" square adapter + a 3D-printed sheath + a custom-cut 5mm Allen key. (Please note that due to the small size of the piece, a 0.2mm nozzle is pretty much required )

  2. The "Coupler" way: A 7mm shaft coupler used with a custom-cut 5mm Allen key.


Assembly


Bill of Materials (BOM)

Component

Qty

Notes

Femobook A2

1

Motor block and catch-cup. 

1ZPresso ZP6 Special

1

6mm x 300mm Rods

2

Carbon fiber, Alu, or Steel. Must be rigid & straight.

5mm Allen Key

1

Requires cutting (Dremel or hacksaw) to length.

Drive Adapter

1

Option A: 7mm shaft coupler OR Option B: 1/4" Hex to 1/4" Square adapter.

6x2mm Magnets

4

For magnetic catch cup alignment.

Rubber Pads

4

Optional: for base stability.


Implementation & Tips

  • Adaptability: If you have a different grinder, you only need to modify the Collar file to match your grinder's diameter.

  • Alignment: Ensure your 5mm Allen key segment is cut perfectly straight to avoid wobbling at high torque.

  • Dial Indicator: cut a piece of color filament and insert it into the motor base part.

  • Printed in PLA, 0.20mm, 4 walls. Use precision hole compensation if you want the rods to slide easily. Otherwise, use a 6mm drill bit to widen the rod holes slightly.

  • USE RDT : The model in its current state tends to produce quite a bit of static retention. I intend to remedy that with a knocker and bellows, but in the meantime, RDT goes a long way.


Roadmap (V1.0)

This is an evolving project. Future updates will include:

  • [ ] Custom Bellows for low retention

  • [ ] Mechanical Knocker

  • [ ] Custom CNC drive-shaft adapter model

Thanks & Acknowledgements

Credit to @fused_visions for our back-and-forth about modding the A2 . Check out their store and Instagram, they do great stuff

Credit in advance to @thcecilia and @SpoonUnit for the upcoming knocker design

Tagi